PAD
L-Bracket Screw/Spacer/Washer Combo (using 48 per pad, 96 total)M4-0.7 DIN 7985, 8mm Length
Aluminum Spacer, #8 hole, 1/4 L 1/4 OD
M7 DIN 125 Steel Zinc Flat Washer
L-Bracket Foam Padding (sits on the top of each L-Bracket)
Mounting Tape, 3/4-inch (cut to fit, adhesive side down, cover top with electrical tape to prevent sliding)
Stage Screws (top)
M6-1 12mm Length countersunk (using 52 per pad, 104 total, installed like this by drilling with a 1/2'' countersink bit)
M4-0.7 8mm Length countersunk (using 32 per pad, 64 total)
Stage Scews (underneath top layer)
M4-0.7 8mm Length SEMS screw (using 16 per pad, 32 total, in the corners of the arrow panels)
M4-0.7 12mm Length SEMS screw (using 20 per pad, 40 total, secures the 5 support panels per pad)
M4-0.7 16mm Length SEMS screw (using 16 per pad, 32 total, on the light panels beneath the arrows)
I managed to salvage enough of the stock washer-head screws to use on each of the rubber corners under the arrow panels, so those were not replaced.
Foot Panels (4 pink, 4 blue, 8 total)
Exact replacements
Casters (4 per pad, 8 total)
Exact replacements
Leg Levelers (4 per pad, 8 total)
Exact replacements
CABINET
Fan (mounted on the back)Mechatronics 120x120x38mm High Speed AC Fan
Tube Connecting Pad to Cabinet
Exact replacement
Casters (4 total)
Exact replacements
Leg Levelers (4 total)
Exact replacements
machine screw manufacturer
ReplyDeleteNice blog thanx for sharing, we At Capital Bolts Our primary focus is on providing high-quality products from many manufacturers.
ReplyDeleteDin 7976
Din 7981
Din 7982
Din 7983
Din 7984
Din 7985
Din 7991
Din 7995
Din 7996
Din 7997